We improvethe efficiency
OF MOTORS AND GENERATORS
at the design level
Technologies are applicable to
ALL TYPES
of electric machines
We successfully upgrade
SIEMENS
TESLA
products of market leaders
We provide
A REDUCTION IN PRODUCTION
costs from 15%.
WE HAVE DELEOPED PRINEM TECHNOLOGIES
In the era of electric machines the whole world was waiting for a new global technology.
Meet the innovative Russian development – PRINEM technologies!
We have created technologies of international standard based on a new vision of the nature of electromagnetic phenomena.
For the first time in the last 150 years we have shaped new laws for electromagnetic flows propagation and refined their topology.
This provided incredible opportunities for modelling and calculating the electric machines with outstanding characteristics.
We have created our own calculation model of electric machines applicable to products of any type and capacity: asynchronous and synchronous motors, power generators.
This calculation model in practice surpasses the design modules of expensive imported software.
Our “PRINEM ENGINEERING” Engineering Centre successfully upgrades the products of world market leaders SIEMENS, TESLA and YASA.
The efficiency of technology application is 100%.
We create electric machines of a unique design that have no analogues in the world. This is the best confirmation of the effectiveness of technology.
PRINEM technologies are the breadth of life for modern manufacturers of motors and generators which are in a difficult economic situation.
For them PRINEM is a unique opportunity to quickly and cost-effectively increase the efficiency of their production.
We are confident that our technologies can improve the quality of life for people in the era of electric machines.
Guaranteed
INCREASE IN EFFICIENCY
in the same weight and dimensions
Energy efficiency
REACHING OF
IE3, IE4, IE4+
in the same weight and dimensions
Creating a multiple
INCREASE IN RELIABILITY
to failure
Improving
FREQUENCY RESPONSE DATA
of motors and generators
Increasing
THE LOAD CAPACITY
of electric machines
OUR ENGINEERING SOLVES THE MAIN REQUESTS OF MANUFACTURERS
PRINEM
CHOOSE YOUR IMPLEMENTATION MODE
“PRINEM ENGINEERING” Research and Production Centre offers engineering services for the modernization and creation of electric machines.
Our solutions are able to meet the needs of any producer of motors and generators.
We offer various levels of implementation: from one-step modernization of serial products to the development of electric machines of an exclusive design.
We always focus on the result so we are ready to perform a free assessment of the effectiveness of technologies applications and provide you with all the necessary information support.
We guarantee impressive results with three modes of modernization and design.
CHANGE OF A ROTOR DESIGN
Without increasing the cross section of the squirrel cage rods, without changing the materials of the rotor, without changing a stator part.
We carry out a one-step modernization of the customer’s serial products using PRINEM technologies. With this level of implementation we design only a rotor that ideally matches the customer’s existing stator.
Even with such a partial modernization we provide an increase in the energy saving of the engine by 1-2 levels, efficiency up to 15%, rated power up to 15%, torque up to 30%, a decrease in operating temperature, an increase in overload capacity up to 30% and an increase in frequency characteristics.
Recuperation is possible in all operating modes.
CHANGE OF THE ROTOR AND STATOR DESIGN
We carry out an integrated modernization of the active part of an electric machine or design it from scratch. This allows us to achieve the highest results in reducing its consumption of materials, increasing capacity characteristics and energy saving.
The effectiveness of our design work is measured in tens of percent (or by times)
NEW TECHNOLOGIES AND DESIGN
We have patented a number of revolutionary technological solutions that have no analogues in the world including technologies:
For the first time in the history of electrical engineering we have developed a range of electric machines with a unique design. The list of them can be viewed here.
CASES
EXAMPLES OF THE EFFICIENCY OF APPPLYING OUR TECHNOLOGIES
We give the examples of PRINEM practical application to electric machines of various types.
SUMMARY
Reduction in weight and dimensions while maintaining the capacity and energy efficiency of the electric machine is achieved through a new vision of the nature of magnetic field in the constructs obtained from this vision.
DIMENSION REDUCED BY ONE STAGE
The overall dimension of the engine is reduced from 80 mm to 71 mm
INCREASED EFFICIENCY IN A SMALLER DIMENSION!
The engine upgraded according to PRINEM technologies produces more efficiency in the 71 mm dimension than SIEMENS in the 80 mm dimension.
INCREASED EFFICIENCY BY 5.3%
The engine upgraded using PRINEM technologies has a higher efficiency by 5.3%
WEIGHT REDUCED BY 30%
The engine upgraded with PRINEM technologies weighs 3.6 kg less.
INTEGRATED MODERNIZATION
The integrated modernization of the active part of the electric machine (PRINEM rotor + PRINEM stator) will allow to achieve even greater impressive results.
SUMMARY
The increase in efficiency and energy saving of an electric machine is achieved through a new vision of the nature of magnetic field in the constructs obtained from this vision.
INCREASED CAPACITY BY 36%
Engine upgraded with PRINEM technologies produces 36.36% more capacity in the same size
INCREASED EFFICIENCY BY 9.4%
The engine upgraded using PRINEM technologies shows a significant increase in efficiency.
INTEGRATED MODERNIZATION
The integrated modernization of the active part of an electric machine (PRINEM rotor + PRINEM stator) allows to achieve even greater results in increasing power characteristics. Achievement of IE3 and IE4 energy saving is possible!
SUMMARY
The increase in the efficiency of an electric machine is achieved through a new vision of the nature of magnetic field in the constructs obtained from this vision.
GAINED INCREASE IN EFFICIENCY BY 8.3%
The increase in efficiency was achieved due to rotor modernization.
INTEGRATED MODERNIZATION
The integrated modernization of the active part of an electric machine (PRINEM rotor + PRINEM stator) will allow to achieve even greater results in improving power characteristics and energy saving.
SUMMARY
A unique increase in characteristics and a change in the design of an electric machine is achieved through a new vision of the nature of magnetic field in the design solutions derived from this vision.
ZERO BREAKING TORQUE PROVIDED =
GROWTH IN AVERAGE DAILY PRODUCTIVITY BY 30%
The PRINEM generator guarantees an average daily power output of 30%. This is particularly true in climatic regions with low average monthly wind speeds.
INCREASED FAILURE RELIABILITY BY 51 TIMES
When one or more windings fail the generator operates in a routine mode with a proportional loss of capacity.
Production is possible: one tooth – one phase.
Production is possible: one tooth – one phase.
SIMPLIFIED DESIGN AND REDUCED COST
Surge protection, ballast system, rectifier have been excluded from the system design.
SUMMARY
The unique simplification of the design and reduction in the price of an electric machine is achieved through a new vision of the nature of magnetic field in the design solutions derived from this vision.
WE CREATED AN AXIAL ASYNCHRONOUS MOTOR
For the first time in the history of electrical engineering an asynchronous axial motor was produced!
COMBINED RELIABILITY AND SIMPLICITY IN IT
Asynchronous axial motor has all the obvious advantages of asynchronous motors: reliability, simplicity, use of standard materials in the design.
ITS COST IS MORE THAN 7 TIMES LOWER AN ANALOGUE
The asynchronous axial motor of the same capacity costs 86% less.
SUMMARY
A unique increase in characteristics and a change in the design of an electric machine is achieved through a new vision of the nature of magnetic field in the design solutions obtained from this vision.
GROWTH IN EFFICIENCY AND POWER BY 2%
The high-tech YASA engine upgraded with PRINEM technologies has greater efficiency and capacity.
SUMMARY
A unique increase in characteristics and a change in the design of an electric machine is achieved through a new vision of the nature of magnetic field in the design solutions derived from this vision.
WE WERE ABLE TO PRODUCE A SYNCHRONOUS NON-SALIENT POLE ROTOR
A rotor of a unique design has been produced for the first time in history!
СНИЗИЛИ СТОИМОСТЬ ИЗДЕЛИЯ НА 30%
Достигается за счёт снижения материалоёмкости и применения более дешёвых материалов
ОБЕСПЕЧИЛИ РОСТ КПД ВЫШЕ 92%
КПД превышает значение 92%
ДОСТИГЛИ РОСТА МОЩНОСТИ НА 10%
Модернизация позволяет увеличить мощность двигателя не менее чем на 10%
SUMMARY
A unique increase in characteristics and a change in the design of an electric machine is achieved through a new vision of the nature of magnetic field in the design solutions derived from this vision.
WE HAVE ACHIEVED COST REDUCTION BY 30%
Achieved by reducing material consumption and using cheaper materials.
INCREASED EFFICIENCY ABOVE 90%
Efficiency exceeds 90%
OUR TECHNOLOGIES GIVE POWER GROWTH BY 12%
Modernization allows to increase engine power by at least 12%.
ENJOY ALL THE ADVANTAGES OF PRINEM TECHNOLOGY
SEND AN REQUEST AND EVALUATE THE EFFICIENCY OF PRINEM TECHNOLOGIES APPLICATION
Efficiency calculation is performed by us FREE OF CHARGE within 3 working days after receiving a request in the prescribed form.
The data of this calculation will allow you to quickly assess the feasibility of introducing PRINEM technologies into your production.
Each calculation we make is individual and is made by our experts in full accordance with the goals of the Customer
FREE PRELIMINARY EVALUATION of effectiveness (1 week)
1 day: we will send you a form to fill in the initial data upon request.
3 days: we will perform a free calculation of the effectiveness of PRINEM technologies application according to a form received.
1 day: we will discuss with you the results of preliminary calculations, form the success criteria for testing a prototype, conclude a confidentiality agreement and a preliminary agreement.
WE DESIGN AND MANUFACTURE A PROTOTYPE FOR TESTS (1 MONTH)
Option 1: the prototype is made by the Customer (for electric machines with a power of more than 3 kW).
We carry out the design solution of an active part of the electric machine and transfer it to the Customer for producing a prototype.
Option 2: we produce a prototype (for electric machines up to 3 kW).
We will independently produce a working prototype of the product or a part of it, for example, the PRINEM rotor. Term – 1 month.
JOINT TESTS OF THE PROTOTYPE
(2 DAYS)
Together with the customer we test the completed prototype or part of it (for example, the PRINEM rotor) in order to achieve the Success Criteria.
Tests can be carried out:
1) at our test bench;
2) at Customer’ test bench;
3) in an independent testing centre.
Based on the test results the parties draw up a test report as well as determine the procedure and conditions for further cooperation.
CONCLUDING A LICENSE AGREEMENT
(1 WEEK)
The parties enter into a License Agreement for the right to produce and sell products using PRINEM technologies.
The terms of each agreement are determined by the parties individually during the negotiations.
INTRODUCING PRINEM TECHNOLOGIES INTO PRODUCTION (FROM 1 MONTH)
We provide full support of the project at all stages of its implementation.
We help to introduce technology into mass production.
We provide assistance in the commercial implementation of projects with our participation.
WE INCREAS THE COMPETITIVENESS OF PRODUCTS
Within 3 MONTHS, with minimal costs, the customer receives a SPECIFIC RESULT: increasing the competitiveness of their products in the market.
THE ONLY IN THE WORLD
NINE-PHASE ASYNCHRONOUS ELECTRIC MOTOR
Electric motor with three autonomous (isolated) three-phase groups of windings (possibly 12, 15, 18 or more phase execution).
ASYNCHRONOUS AXIAL MOTOR
The magnetic core is made of dynamic laminated iron. Heating from Foucault currents does not exceed the parameters of general industrial asynchronous electric motors.
ASYNCHRONOUS AXIAL MOTOR WITH INTERNAL ELECTROMAGNETIC DIFFERENTIAL
This is the world’s first axial drive in which the function of the mechanical differential is performed by the electric motor.
SYNCHRONOUS GRADIENTLESS MOTOR
The motor is characterized by huge starting torques from the moment of starting and unparelled acceleration dynamics.
Step mode is available
PRINEM MANAGEMENT CONTROLLER
Provides a unique way of switching the windings of an electric machine. Completely eliminates the negative impact of counterelectromotive force, returning them in the form of energy to the supply network or battery.
MOTOR WITH SYNCHRONOUS NON-SALIENT POLE ROTOR
Inside the motor with a serial “asynchronous” stator, a synchronous non-salient pole rotor is installed on inexpensive permanent magnets.
RING ASYNCHRONOUS MOTOR
The active part of the motor is formed in the outer radius (inside there may be blades, spokes, emptiness).
ABOUT US
SCIENTIFIC AND PRODUCTION CENTRE "PRINEM ENGINEERING"
The centre is located in Saratov city.
The structure of the centre and the experience of our experts allow us to solve problems of any complexity in the modernization and creation of electrical machines.
SCIENTIFIC CENTRE
Engaged in scientific development and patenting of new engineering solutions.
At the moment 6 patents have been issued in the national zone of the Russian Federation and they are being confirmed at the international level.
Information on exclusive design solutions is sent on request.
ENGINEERING CENTRE
This is the leading subdivision of our company. Its specialists process incoming applications, make calculations and develop design solutions.
PRODUCTION CENTRE
The production centre manufactures operating prototypes of electrical machines (up to 5 kW) as well as the elements of their structure using PRINEM technologies.
The centre is equipped with its own modern test bench.
COMMERCIAL SUBDIVISION
Supervises the entire cycle of interaction with customers, document turnover, conclusion.
7
PATENTS FOR INVENTIONS
in Russia and in the world
2021
year
obtaining basic patents
56
MOTORS AND GENERATORS
modernized and built
100%
EFFICIENCY
technology applications
PRINEM ENGINEERING
OUR TEAM
The main value of our company is its people.
- golovko@prinem.one
- + 7 906 609-52-05
OLEG GOLOVKO
Project Engineer, Co-author, Project Director
- lagutin@prinem.one
- +7 495 197 38 41
SERGEY LAGUTIN
Project Engineer, Co-author, Technical Director
- seklyutsky@prinem.one
- +7 495 197 38 41
SERGEY SEKLUTSKIY
Project Engineer, Co-author, Finance Director
- anisimov@prinem.one
- +7 910 660 20 20
VLADIMIR ANISIMOV
Commercial Director
- +7 495 197 38 41
VLADISLAV TOMILIN
Development Director
- gordienko@prinem.one
- +7 495 197 38 41
NIKITA DORDIENKO
Leading Engineer of Engineering Centre, Administrative Director
- +7 495 197 38 41
VASILII SEKRIERU
Leading Engineer of Production Centre
- +7 495 197 38 41
ANDREY SMIRNOV
вLeading Engineer of PRINEM POLYFAZ
- +7 495 197 38 41
GERMAN TAU
Engineer of Production Centre
CONTACTS
“ETER-ENERGY GLK” LLC (TIN 5043064960)
410015, Russia, Saratov city, Fabrichnaya Street, h. 3, bld.1
Golovko Oleg Anatolyevich +7 906 609 52 05
Anisimov Vladimir Vitalievich +7 910 660 20 20
CRM-форма появится здесь
© PRINEM ENGINEERING
— Бесплатные Сайты и CRM.